Things I'm making.

Casiotone MT-30 restoration

I bought a 1981 Casiotone MT-30 keyboard at a Japanese auction for €15. When I plugged it in and pressed a key, all I heard from the line out was noise.

Before I ordered any parts, I wanted to know whether the main chip was getting the right voltage. I checked the power supply first, then the 2SD400 transistor that feeds the chip. I kept a repair log with two labels, confirmed and assumed. A part only made it onto the shopping list when I could point to a measurement that justified buying it.

I traced one fault to the tone memory selector. Along the way I nearly fried the board, but the main chip survived. By then I could hear the notes, though they were barely audible. I traced the low volume to the original 4558 op-amp in the output stage. Both channels were stuck at the supply rail.

An NE5532 brought the volume back. The keyboard sounded a little thinner to my ears with that chip in place, so I soldered in a socket and swapped in a JRC4558 op-amp, a closer match to the original.

← All things